| Fenner Drives Afd10458 5/8" Fixed Bore 1 Groove Standard V-Belt Pulley 10.25" Od | Cap bolt:7/8-9 UNC; P90°:207 kN; ba:69.85 mm; P60°:345 kN; H1:169.875 mm; L:558.8 mm; R2:33.337 mm; H:338.137 mm; Pa:42.9 kN; A2:225.425 mm; P180°:145 kN; A1:158.75 mm; Cap bolt recommended tightening torque:813.5 N·m; PG:1/4 NPT; R1:104.775 mm; H2:66.675 mm; Max. speed for PosiTrac Plus seal:825 r/min; Labyrinth ring:2 x LOR 155; Ca:89.789 mm; End plug (suffix Y):EPR 21; |
| D&D PowerDrive 780L4 Poly V Belt | Basic static load rating C0:1660 kN; r1,2 min.:3 mm; Fatigue load limit Pu:153 kN; da max.:188 mm; b:13.9 mm; Reference speed:1500 r/min; Ba min.:18 mm; d3:210 mm; Calculation factor Y0:1.8; B:104 mm; Calculation factor e:0.35; K:7.5 mm; D1 ≈:244 mm; B1:147 mm; Calculation factor Y1:1.9; d2 ≈:188 mm; Da max.:276 mm; B4:28 mm; Calculation factor Y2:2.9; d1:140 mm; |
| Air Compressor Belt CBT-223 Poly V Belt for Sears Craftsman Porter Cable CBT223 | G3:9 mm; G:Tr 360x5; Hydraulic nut:HMV 72E; d1:340 mm; B:58 mm; Mass adapter sleeve assembly:56 kg; B1:259 mm; d3:460 mm; B5:75 mm; A:3.5 mm; d:360 mm; G2:M 6; |
| Fenner Power Plus SPZ1112 V-Belt, (080903), New | DA_:57.15; Prod_Type3:ACBB_SR_MM_DB; D_b:371; C:605; hidTable:ecat_NSANGB; LangID:1; DI_:222.254; d:180; KBRG:7134; C0:975; hidYobi:7336BDB; B_:75; r1:1.5; SDM_:279.989; yobi:7336BDB; da:198; rb:1.5; r:4; SRE:29.72; SRI:29.72; |
| 240-J-3 V-BELT POLY V MICRO-V Polybelt.com 240J3 Rubber USA FREE SHIPPING | J1:53.975 mm; S:4.763 mm; A1:88.9 mm; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Housing:FSAF 313; RG:3/8 NPT; dc:61.913 mm; Max. speed for Taconite seal:1000 r/min; P120°:21.8 kN; H2:31.75 mm; R2:21.431 mm; P180°:23.1 kN; J min.:244.475 mm; H1:88.9 mm; h:35.719 mm; da:65 mm; Stabilizing ring:SR-16-13; Appropriate attachment bolt size G:0.625 in; Initial grease fill:87.885 g; |
| 6 Ribbed Poly V Belt 39" Inch Micro Rib Groove Flat Belt Metric 390J6 390 J 6 | F:90 mm; Db:91 mm; E:98 mm; Basic static load rating C0:173 kN; B:30 mm; Basic dynamic load rating C:64.4 kN; D:110 mm; r1,2 min.:1 mm; db:89.3 mm; Da:99 mm; s max.:1 mm; Limiting speed:5300 r/min; ra max.:1 mm; Mass bearing:0.92 kg; Fatigue load limit Pu:21.6 kN; da:97.2 mm; Reference speed:4500 r/min; d:80 mm; |
| FENNER 686PJ/270J POLY V MULTI RIBBED BELT J SECTION 2.34MM PITCH - 686MM / 27" | d:150 mm; Oil Holes:2.5 mm; B:25 mm; da:168 mm; Da:188 mm; Dynamic Load Rating:73.1 kN; D:210 mm; Radius:1.5 mm; Static Load Rating:131.9 kN; |
| D&D PowerDrive 280J6 Poly V Belt | SDM_:66; da:48; ra:1.5; dd min:60; D_:90; KBRG:4162; C:114; dc min:55; Fw:52; C_conv:114000; d:40; Z_:12; D_a max:82; Prod_Type3:CRB_SR_NUP; hidTable:ecat_NSCLDR; SBRG:23; LangID:1; Oil rpm:7500; DE_:80; DA_:14; |
| FENNER 686PJ/270J POLY V MULTI RIBBED BELT J SECTION 2.34MM PITCH - 686MM /27" | Stabilizing ring:SR-44-38; Cap bolt, SAE grade:5; Da:399.999 mm; R1:130.175 mm; da:201.613 mm; H1:241.3 mm; Housing:SAF 544; A2:304.8 mm; ba:90.487 mm; S:4.763 mm; J min.:628.65 mm; P180°:173 kN; P150°:145 kN; Appropriate attachment bolt size G:1.5 in; RG:1 NPT; Ca:117.805 mm; R2:46.831 mm; Eye bolt:2 x 1/2-13 UNC; L:831.85 mm; P120°:160 kN; |
| Fenner Drives Afd104100 1" Fixed Bore 1 Groove Standard V-Belt Pulley 10.25" Od | RG:3/8 NPT; Cap bolt, SAE grade:8; Cap bolt:2 x 3/4-10 UNC; Ca:67.793 mm; J min.:269.875 mm; ba:36.513 mm; Taconite seal (db shaft position):TER 84; P90°:51.6 kN; P60°:85.9 kN; dc:76.2 mm; Appropriate attachment bolt size G:0.75 in; Initial grease fill:365.71 g; Stabilizing ring:2 x SR-1616; db:92.075 mm; P120°:32 kN; Cap bolt recommended tightening torque:515.2 N·m; da:80 mm; P150°:28.9 kN; |
| D&D PowerDrive 600J6 Poly V Belt | Max. speed for Taconite seal:950 r/min; H:196.85 mm; A2:206.375 mm; R2:27.781 mm; A1:98.425 mm; Cap bolt:1/2-13 UNC; ba:40.481 mm; P180°:58.7 kN; H1:101.6 mm; P150°:48 kN; J min.:263.525 mm; Housing:SAFS 518; Da:160 mm; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; P90°:84.5 kN; L:349.25 mm; Ca:49.809 mm; Pa:10.9 kN; P60°:141 kN; |
| D&D PowerDrive 820J6 Poly V Belt | Coefficient of friction µ min.:0.05; Mass bushing:0.033 kg; B:20 mm; d:20 mm; Specific static load factor K0:20 N/mm²; D1:32 mm; Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; Tolerance shaft:h8; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; B1:3 mm; Coefficient of friction µ max.:0.1; D:26 mm; |
| D&D PowerDrive 320J8 Poly V Belt | B:20 mm; Mass inner ring:0.016 kg; r, r1,2 min.:0.3 mm; F:19 mm; d:15 mm; |
| 550-J-6 V-BELT POLY V MICRO-V Polybelt 550J6 Rubber 55" Long | d1 ≈:357 mm; Calculation factor e:0.33; Basic static load rating C0:4750 kN; d:300.038 mm; a:162 mm; Design variant/feature:TDO/XDC; Calculation factor Y2:3; T:174.625 mm; Mass bearing:71.5 kg; Fatigue load limit Pu:400 kN; Comparative axial load rating CFa:176 kN; Thrust factor K:1.73; Calculation factor Y0:2; Basic dynamic load rating C:2177 kN; C:136.525 mm; r3,4 min.:1.5 mm; D1 ≈:403 mm; |
| Thermoid 490J6 Poly V-Belt | r1,2 min.:1.1 mm; d1:247 mm; Mass shaft washer:1.51 kg; B:11 mm; d:200 mm; |
| 6 Ribbed Poly V Belt 49" Inch Micro Rib Groove Flat Belt Metric 490J6 490 J 6 | ALPHA_:40; Oil rpm:3200; B_:26; db:86; hidTable:ecat_NSANGB; SRI:9.91; 2B_:52; Prod_Type3:ACBB_SR_MM_DF; hidYobi:7216BWDF; SDM_:109.992; Z_:16; mass:2.98; rb:1; ao:66.3; d:80; C0:139; r:2; SRIX:0.08; ALP21:40; DE_:129.241; |
| No. | Brand | a | S | s | E | B | T | D | M |
| 610PJ/240J | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| 215 | - | - | - | - | - | 85 mm | - | - | - |
| 240J4 | - | 64.418 mm | - | - | - | 50.8 mm | 50.8 mm | 393.7 mm | - |
| 470J6 | - | - | - | - | - | - | - | - | - |
| 280J6 | - | - | - | - | - | - | - | - | - |
| 820J6 | - | - | - | - | - | 20 mm | - | 26 mm | - |
| 610PJ/240J | - | - | - | - | - | - | - | - | - |
| 0460125 | - | - | - | 13 mm | - | - | - | - | - |
| 500J6 | - | - | - | - | - | - | - | - | - |
| SPZ1112 | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | 55 mm | - | - | - |
| 584PJ/230J | - | 10.9 mm | - | - | - | 12 mm | - | 47 mm | - |
| 490J6 | - | - | - | - | - | 335 mm | - | 870 mm | - |
| 930K6 | - | - | - | - | - | - | - | - | - |
| 457PJ/180J | - | - | - | - | - | 30 mm | - | - | - |
| 320J8 | - | - | - | - | - | 20 mm | - | - | - |
| 457PJ/180J | - | - | - | - | - | 28 mm | - | - | - |
| 780L4 | - | - | - | - | - | 104 mm | - | - | - |
| 380J6 | - | 19.883 mm | - | - | - | 23 mm | 24.75 mm | 85 mm | - |
| 120J4 | - | - | 4.763 mm | - | - | - | - | - | - |
| 584PJ/230J | - | - | - | - | - | 220 mm | 220 mm | 615.95 mm | - |
| 686PJ/270J | - | - | 4.763 mm | - | - | - | - | - | - |
| 915K6 | - | - | - | - | - | - | - | 170 mm | - |
| 550-J-6 | - | 162 mm | - | - | - | - | 174.625 mm | 422.275 mm | - |
| FS0209 | - | - | 4.763 mm | - | - | - | - | - | - |
| 490J6 | - | - | - | - | - | 11 mm | - | - | - |
| 480J8 | - | - | 4.763 mm | - | - | - | - | - | - |
D&D PowerDrive 930K6 Poly V Belt Video
Fenner 0314050 30M B/17 Poly TwistLink Composite V Belt
Model: 0314050. Fenner Composite V-Belt.
Poly-V Belts - JK Fenner
Multi-pull Poly-V belts have higher-power carrying capacity than conventional V-belts. Single flexible low stretch belt drive eliminates the need for multiple/ ...
Fenner Drives® to Debut Eagle Poly-V™ Belts at Modex ...
Fenner Drives introduces the Eagle Poly-V line of belts, featuring PJ-profile belts designed specifically for roller conveyor applications. The Eagle Poly-V ...
Fenner Drives rolls out Eagle Poly-V belt line | Rubber News
Mar 26, 2020 — "Eagle Poly-V belts are the latest innovation from Fenner Drives using high performance polyurethane materials to improve performance and ...
V belt - Eagle Poly-V™ - Fenner Drives
Find out all of the information about the Fenner Drives product: V belt Eagle Poly-V™. Contact a supplier or the parent company directly to get a quote or ...
PolyDrive PLUS - FENNER Power Transmissions
Fenner® PolyDrive PLUS ribbed belts are an ideal solution for compact drives in household appliances and heavy machinery. The ribbed belts enable economic ...
Fenner Poly-F Plus PB Classical Belts-C Section,V Belts
Fenner Poly-F Plus PB Classical Belts-C Section,V Belts. Suitable for V-Flat drives units applications, transmission engineering, conveyance technology, ...
Fenner Drives 314050 Poly-Twistlink V-Belt, B/17/5L ...
Fenner Drives 314050 Poly-Twistlink V-Belt, B/17/5L Section, Thermoplastic Polyester, 17 mm Top Width, 30.5 m Overall Length: Amazon.com: Industrial ...